The Linux GCC HOWTO
Daniel Barlow
Linux Documentation Project
May 1999
This document covers how to set up the GNU C compiler and development
libraries under Linux, and gives an overview of compiling, linking,
running and debugging programs under it. Most of the material in it
has been taken from Mitch D'Souza's GCC-FAQ or the ELF-HOWTO - it
replaces both documents.
This is the first version to be written in DocBook instead of the old
Linuxdoc format, and may contain markup errors. Please let me know if
you find anything worng.
As can be determined from the long times between updates of this
document, I don't actually have the time or inclination to maintain it
much. If you have, can, and want to, drop me some email describing
what you'd do with it and why you think you'd be good at it.
_________________________________________________________________
Table of Contents
[1]Preliminaries
[2]ELF vs. a.out, libc 5 vs 6
[3]Administrata
[4]Typography
[5]Where to get things
[6]GCC installation and setup
[7]GCC versions
[8]Where did it go?
[9]Where are the header files?
[10]Building cross compilers
[11]Porting and Compiling
[12]Automatically defined symbols
[13]Compiler invocation
[14]Portability
[15]Debugging and Profiling
[16]Preventative maintenance (lint)
[17]Debugging
[18]Profiling
[19]Linking
[20]Shared vs static libraries
[21]Interrogating libraries (`which library is sin() in?')
[22]Finding files
[23]Building your own libraries
[24]Dynamic Loading
[25]Concepts
[26]Error messages
[27]Controlling the operation of the dynamic loader
[28]Writing programs with dynamic loading
[29]Contacting the developers
[30]Bug reports
[31]Helping with development
[32]The Remains
[33]The Credits
[34]Translations
[35]Feedback
[36]Legalese
Preliminaries
ELF vs. a.out, libc 5 vs 6
Three years ago when this document was first created, I opened this
section by saying "Linux development is in a state of flux right now"
and going on to describe how ELF was replacing the older a.out binary
format.
It still is in a state of flux. It always will be. Though that
particular change is long since past, development of the Linux kernel
and the surrounding system continues to happen, and things change for
developers as a result. So it's a good idea to know upfront what kind
of system you have in front of you.
The possible candidates, in order of age, are
* libc 4, a.out: very old systems
* libc 5, ELF: Red Hat 4.2, Debian 2.0
* libc 6 (a.k.a glibc 2), ELF: Red Hat 5 - 5.2, Debian 2.1
* libc 6.1,(a.k.a glibc 2.1) ELF: Red Hat 6
How to tell? The simplest approach is to pick a binary that you
consider is typical (e.g. /bin/ls and run ldd on it. One of the listed
libraries should be libc - check its version number.
$ ldd /bin/ls
libc.so.6 => /lib/libc.so.6 (0x4000e000)
/lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x40000000)
This document was created on a [37]Debian 2.1 system, so no surprise
there.
It's entirely possible that the system you're using may have a mix of
different versions on it. What you probably want to know in that case
is the version that its C development environment is set up for, so
you're best off compiling "hello world" and running ldd on the output
thus created. Note that for historical reasons, gcc defaults to an
output file called a.out even on ELF systems, so don't assume anything
from that.
_________________________________________________________________
Administrata
The copyright information and like legalese can be found at the end of
this document, together with the statutory warnings about asking dumb
questions on Usenet, revealing your ignorance of the C language by
reporting bugs which aren't, and picking your nose while chewing gum.
_________________________________________________________________
Typography
If you're reading this in Postscipt, dvi, or html format, you get to
see a little more font variation than people with the plain text
version. In particular, filenames, commands, command output and source
code excerpts are set in some form of typewriter font, whereas
`variables' and random things that need emphasizing are emphasized.
You also get a usable index. In dvi or postscript, the numbers in the
index are section numbers. In HTML they're just sequentially assigned
numbers that you can click on. In the plain text version, they really
are just numbers. Get an upgrade!
The Bourne (rather than C) shell syntax is used in examples. C shell
users will want to use
% setenv FOO bar
where I have written
$ FOO=bar; export FOO
If the prompt shown is # rather than $, the command shown will
probably only work as root. Of course, I accept no responsibility for
anything that happens to your system as a result of trying these
examples. Have a nice day :-)
_________________________________________________________________
Where to get things
In the three years since the first `HOWTO' version of this, useful
Linux distributions have become prevalent. So, where once I'd have
spent pages listing FTP sites and hours updating (failing to update)
version numbers and directory names, now I will simply say - your
distribution maintainer should be taking care of this for you. If you
don't have, say, gcc installed, find the RPM or the deb packages that
contain it, and install it. If that isn't an option because you don't
have a friendly distribution, you've almost certainly been using Linux
long enough that you don't need me to tell you where to find things
anyway.
_________________________________________________________________
This document
You're reading it. You probably have it already.
This document is one of the Linux HOWTO series, so is probably already
installed somewhere in /usr/doc if you're reading this on a linux box.
Failing that, from all Linux HOWTO repositories (try [38]Metalab) and
(possibly in a slightly newer version) at my personal web site
[39]www.telent.net.
_________________________________________________________________
Other documentation
The official documentation for gcc is in the source distribution (see
below) as texinfo files, and as .info files. If you have a fast
network connection, a cdrom, or a reasonable amount of patience, you
can just untar it and copy the relevant bits into /usr/info. If not,
you may find them at [40]tsx-11, but not necessarily always the latest
version.
There are two source of documentation for libc. GNU libc comes with
info files which describe Linux libc fairly accurately except for
stdio. Also, the [41]manpages archive are written for Linux and
describe a lot of system calls (section 2) and libc functions (section
3).
_________________________________________________________________
GCC
There are two answers.
(a) The official Linux GCC distribution can always be found in binary
(ready-compiled) form at . At the time of writing, 2.7.2
(gcc-2.7.2.bin.tar.gz) is the latest version.
(b) The latest source distribution of GCC from the Free Software
Foundation can be had from [42]GNU archives. This is not necessarily
always the same version as above, though it is just now. The Linux GCC
maintainer(s) have made it easy for you to compile the latest version
available yourself --- the configure script should set it all up for
you. Check [43]tsx-11 as well, for patches which you may want to
apply.
To compile anything non-trivial (and quite a few trivial things also)
you will also need the
_________________________________________________________________
C library and header files
What you want here depends on (i) whether your system is ELF or a.out,
and (ii) which you want it to be. If you're upgrading from libc 4 to
libc 5, you are recommended to look at the ELF-HOWTO from
approximately the same place as you found this document.
These are available from [44]tsx-11 as above:
libc-5.2.18.bin.tar.gz
--- ELF shared library images, static libraries and include
files for the C and maths libraries.
libc-5.2.18.tar.gz
--- Source for the above. You will also need the .bin. package
for the header files. If you are deliberating whether to
compile the C library yourself or use the binaries, the right
answer in nearly all cases is to use the binaries. You will
however need to roll your own if you want NYS or shadow
password support.
libc-4.7.5.bin.tar.gz
--- a.out shared library images and static libraries for
version 4.7.5 of the C library and friends. This is designed to
coexist with the libc 5 package above, but is only really
necessary if you wish to keep using/developing a.out format
programs.
_________________________________________________________________
Associated tools (as, ld, ar, strings etc)
From [45]tsx-11, just like everything else so far. The current version
is binutils-2.6.0.2.bin.tar.gz.
Note that the binutils are only available in ELF, the current libc
version is in ELF and the a.out libc is happiest when used in
conjunction with an ELF libc. C library development is moving
emphatically ELFwards, and unless you have really good reasons for
needing a.out things you're encouraged to follow suit.
_________________________________________________________________
GCC installation and setup
GCC versions
You can find out what GCC version you're running by typing gcc -v at
the shell prompt. This is also a fairly reliable way to find out
whether you are set up for ELF or a.out. On my system it does
$ gcc -v
Reading specs from /usr/lib/gcc-lib/i486-box-linux/2.7.2/specs
gcc version 2.7.2
The key things to note here are
* i486. This indicates that the gcc you are using was built for a
486 processor --- you might have 386 or 586 instead. All of these
chips can run code compiled for each of the others; the difference
is that the 486 code has added padding in some places so runs
faster on a 486. This has no detrimental performance effect on a
386, but does make the binaries slightly larger.
* box. This is not at all important, and may say something else
(such as slackware or debian) or nothing at all (so that the
complete directory name is i486-linux). If you build your own gcc,
you can set this at build time for cosmetic effect. Just like I
did :-)
* linux. This may instead say linuxelf or linuxaout, and,
confusingly, the meaning of each varies according to the version
that you are using.
+ linux means ELF if the version is 2.7.0 or newer, a.out
otherwise.
+ linuxaout means a.out. It was introduced as a target when the
definition of linux was changed from a.out to ELF, so you
won't see any linuxaout gcc older than 2.7.0.
+ linuxelf is obsolete. It is generally a version of gcc 2.6.3
set to produce ELF executables. Note that gcc 2.6.3 has known
bugs when producing code for ELF --- an upgrade is advisable.
* 2.7.2 is the version number.
So, in summary, I have gcc 2.7.2 producing ELF code. Quelle surprise.
_________________________________________________________________
Where did it go?
If you installed gcc without watching, or if you got it as part of a
distribution, you may like to find out where it lives in the
filesystem. The key bits are
* /usr/lib/gcc-lib/target/version/ (and subdirectories) is where
most of the compiler lives. This includes the executable programs
that do actual compiling, and some version-specific libraries and
include files.
* /usr/bin/gcc is the compiler driver --- the bit that you can
actually run from the command line. This can be used with multiple
versions of gcc provided that you have multiple compiler
directories (as above) installed. To find out the default version
it will use, type gcc -v. To force it to another version, type gcc
-V version. For example
# gcc -v
Reading specs from /usr/lib/gcc-lib/i486-box-linux/2.7.2/specs
gcc version 2.7.2
# gcc -V 2.6.3 -v
Reading specs from /usr/lib/gcc-lib/i486-box-linux/2.6.3/specs
gcc driver version 2.7.2 executing gcc version 2.6.3
* /usr/target/(bin|lib|include)/. If you have multiple targets
installed (for example, a.out and elf, or a cross-compiler of some
sort, the libraries, binutils (as, ld and so on) and header files
for the non-native target(s) can be found here. Even if you only
have one kind of gcc installed you might find anyway that various
bits for it are kept here. If not, they're in
/usr/(bin|lib|include).
* /lib/,/usr/lib and others are library directories for the native
system. You will also need /lib/cpp for many applications (X makes
quite a lot of use of it) --- either copy it from
/usr/lib/gcc-lib/target/version/ or make a symlink pointing there.
_________________________________________________________________
Where are the header files?
Apart from whatever you install yourself under /usr/local/include,
there are three main sources of header files in Linux:
* Most of /usr/include/ and its subdirectories are supplied with the
libc binary package from H J Lu. I say `most' because you may also
have files from other sources (curses and dbm libraries, for
example) in here, especially if you are using the newest libc
distribution (which doesn't come with curses or dbm, unlike the
older ones).
* /usr/include/linux and /usr/include/asm (for the files <linux/*.h>
and <asm/*.h>) should be symbolic links to the directories
linux/include/linux and linux/include/asm in the kernel source
distribution. You need to install these if you plan to do any
non-trivial development; they are not just there for compiling the
kernel. You might find also that you need to do make config in the
kernel directory after unpacking the sources. Many files depend on
<linux/autoconf.h> which otherwise may not exist, and in some
kernel versions asm is a symbolic link itself and only created at
make config time. So, if you unpack your kernel sources under
/usr/src/linux, that's
$ cd /usr/src/linux
$ su
# make config
[answer the questions. Unless you're going to go on and build the kernel
it doesn't matter _too_ much what you say]
# cd /usr/include
# ln -s ../src/linux/include/linux .
# ln -s ../src/linux/include/asm .
* Files such as <float.h>, <limits.h>, <varargs.h>, <stdarg.h> and
<stddef.h> vary according to the compiler version, so are found in
/usr/lib/gcc-lib/i486-box-linux/2.7.2/include/ and places of that
ilk.
_________________________________________________________________
Building cross compilers
Linux as the target platform
Assuming you have obtained the source code to gcc, usually you can
just follow the instructions given in the INSTALL file for GCC. A
configure --target=i486-linux --host=XXX on platform XXX followed by a
make should do the trick. Note that you will need the Linux includes,
the kernel includes, and also to build the cross assembler and cross
linker from the sources in .
_________________________________________________________________
Linux as the source platform, MSDOS as the target
Ugh. Apparently this is somewhat possible by using the "emx" package
or the "go" extender. Please look at .
I have not tested this and cannot vouch for its abilities.
_________________________________________________________________
Porting and Compiling
Automatically defined symbols
You can find out what symbols your version of gcc defines
automatically by running it with the -v switch. For example, mine
does:
$ echo 'main(){printf("hello world\n");}' | gcc -E -v -
Reading specs from /usr/lib/gcc-lib/i486-box-linux/2.7.2/specs
gcc version 2.7.2
/usr/lib/gcc-lib/i486-box-linux/2.7.2/cpp -lang-c -v -undef
-D__GNUC__=2 -D__GNUC_MINOR__=7 -D__ELF__ -Dunix -Di386 -Dlinux
-D__ELF__ -D__unix__ -D__i386__ -D__linux__ -D__unix -D__i386
-D__linux -Asystem(unix) -Asystem(posix) -Acpu(i386)
-Amachine(i386) -D__i486__ -
If you are writing code that uses Linux-specific features, it is a
good idea to enclose the nonportable bits in
#ifdef __linux__
/* ... funky stuff ... */
#endif /* linux */
Use __linux__ for this purpose, not linux. Although the latter is
defined, it is not POSIX compliant.
_________________________________________________________________
Compiler invocation
The documentation for compiler switches is the gcc info page (in
Emacs, use C-h i then select the `gcc' option). Your distributor may
not have packed this with your system, or you may have an old version;
the best thing to do in this case is to download the gcc source
archive from or one of its mirrors, and copy them out of it.
The gcc manual page (gcc.1) is, generally speaking, out of date. It
will warn you of this when you try to look at it.
_________________________________________________________________
Compiler flags
gcc can be made to optimize its output code by adding -On to its
command line, where n is an optional small integer. Meaningful values
of n, and their exact effect, vary according to the exact version, but
typically it ranges from 0 (no optimization) to 2 (lots) or 3 (lots
and lots).
Internally, gcc translates these to a series of -f and -m options. You
can see exactly which -O levels map to which options by running gcc
with the -v flag and the (undocumented) -Q flag. For example, for -O2,
mine says
enabled: -fdefer-pop -fcse-follow-jumps -fcse-skip-blocks
-fexpensive-optimizations
-fthread-jumps -fpeephole -fforce-mem -ffunction-cse -finline
-fcaller-saves -fpcc-struct-return -frerun-cse-after-loop
-fcommon -fgnu-linker -m80387 -mhard-float -mno-soft-float
-mno-386 -m486 -mieee-fp -mfp-ret-in-387
Using an optimization level higher than your compiler supports (e.g.
-O6) will have exactly the same effect as using the highest level that
it does support. Distributing code which is set to compile this way is
a poor idea though --- if further optimisations are incorporated into
future versions, you (or your users) may find that they break your
code.
Users of gcc 2.7.0 thru 2.7.2 should note that there is a bug in -O2
on these. Specifically, strength reduction doesn't work. A patch can
be had to fix this if you feel like recompiling gcc, otherwise make
sure that you always compile with -fno-strength-reduce
_________________________________________________________________
Processor-specific
There are other -m flags which aren't turned on by any variety of -O
but are nevertheless useful. Chief among these are -m386 and -m486,
which tell gcc to favour the 386 or 486 respectively. Code compiled
with one of these will still work on the other; 486 code is bigger,
but otherwise not slower on the 386.
There is currently no -mpentium or -m586. Linus suggests using -m486
-malign-loops=2 -malign-jumps=2 -malign-functions=2, to get 486 code
optimisations but without the big gaps for alignment (which the
pentium doesn't need). Michael Meissner (of Cygnus) says
"My hunch is that -mno-strength-reduce also results in faster code on
the x86 (note, I'm not talking about the strength reduction bug, which
is another issue). This is because the x86 is rather register starved
(and GCC's method of grouping registers into spill registers vs. other
registers doesn't help either). Strength reduction typically results
in using additional registers to replace multiplications with
addition. I also suspect -fcaller-saves may also be a loss." "Another
hunch is that -fomit-frame-pointer might or might not be a win. On the
one hand, it can mean that another register is available for
allocation. On the other hand, the way the x86 encodes its instruction
set, means that stack relative addresses take more space instead of
frame relative addresses, which means slightly less Icache availble to
the program. Also, -fomit-frame-pointer, means that the compiler has
to constantly adjust the stack pointer after calls, while with a
frame, it can let the stack accumulate for a few calls."
The final word on this subject is from Linus again:
"Note that if you want to get optimal performance, don't believe me:
test. There are lots of gcc compiler switches, and it may be that a
particular set gives the best optimizations for you. "
_________________________________________________________________
Internal compiler error: cc1 got fatal signal 11
Signal 11 is SIGSEGV, or `segmentation violation'. Usually it means
that the program got its pointers confused and tried to write to
memory it didn't own. So, it could be a gcc bug.
gcc is however, a well tested and reliable piece of software, for the
most part. It also uses a large number of complex data structures, and
an awful lot of pointers. In short, it's the pickiest RAM tester
commonly available. If you can't duplicate the bug --- if it doesn't
stop in the same place when you restart the compilation --- it's
almost certainly a problem with your hardware (CPU, memory,
motherboard or cache). Don't claim it as a bug because your computer
passes the power-on checks or runs Windows ok or whatever; these
`tests' are commonly and rightly held to be worthless. And don't claim
it's a bug because a kernel compile always stops during `make zImage'
--- of course it will! `make zImage' is probably compiling over 200
files; we're looking for a slightly smaller place than that.
If you can duplicate the bug, and (better) can produce a short program
that exhibits it, you can submit it as a bug report to the FSF, or to
the linux-gcc mailing list. See the gcc documentation for details of
exactly what information they need.
_________________________________________________________________
Portability
It has been said that, these days, if something hasn't been ported to
Linux then it is not worth having :-)
Seriously though, in general only minor changes are needed to the
sources to get over Linux's 100% POSIX compliance. It is also
worthwhile passing back any changes to authors of the code such that
in the future only `make' need be called to provide a working
executable.
_________________________________________________________________
BSDisms (including bsd_ioctl, daemon and <sgtty.h>)
You can compile your program with -I/usr/include/bsd and link it with
-lbsd (i.e. add -I/usr/include/bsd to CFLAGS and -lbsd to the LDFLAGS
line in your Makefile). There is no need to add -D__USE_BSD_SIGNAL any
more if you want BSD type signal behavior, as you get this
automatically when you have -I/usr/include/bsd and include <signal.h>.
_________________________________________________________________
`Missing' signals (SIGBUS, SIGEMT, SIGIOT, SIGTRAP, SIGSYS etc)
Linux is POSIX compliant. These are not POSIX-defined signals ---
ISO/IEC 9945-1:1990 (IEEE Std 1003.1-1990), paragraph B.3.3.1.1 sez:
"``The signals SIGBUS, SIGEMT, SIGIOT, SIGTRAP, and SIGSYS were
omitted from POSIX.1 because their behavior is implementation
dependent and could not be adequately categorized. Conforming
implementations may deliver these signals, but must document the
circumstances under which they are delivered and note any restrictions
concerning their delivery.''"
The cheap and cheesy way to fix this is to redefine these signals to
SIGUNUSED. The correct way is to bracket the code that handles them
with appropriate #ifdefs:
#ifdef SIGSYS
/* ... non-posix SIGSYS code here .... */
#endif
_________________________________________________________________
K & R Code
GCC is an ANSI compiler; much existing code is not ANSI. There's
really not much that can be done about this, except to add
-traditional to the compiler flags. There is a certain amount of
finer-grained control over which varieties of brain damage to emulate;
consult the gcc info page.
Note that -traditional has effects beyond just changing the language
that gcc accepts. For example, it turns on -fwritable-strings, which
moves string constants into data space (from text space, where they
cannot be written to). This increases the memory footprint of the
program.
_________________________________________________________________
Preprocessor symbols conflict with prototypes in the code
One of the most frequent problems is that some common functions are
defined as macros in Linux's header files and the preprocessor will
refuse to parse similar prototype definitions in the code. Common ones
are atoi() and atol().
_________________________________________________________________
sprintf()
Something to be aware of, especially when porting from SunOS, is that
sprintf(string, fmt, ...) returns a pointer to string on many unices,
whereas Linux (following ANSI) returns the number of characters which
were put into the string.
_________________________________________________________________
fcntl and friends. Where are the definitions of FD_* stuff ?
In <sys/time.h>. If you are using fcntl you probably want to include
<unistd.h> too, for the actual prototype.
Generally speaking, the manual page for a function lists the necessary
#includes in its SYNOPSIS section.
_________________________________________________________________
The select() timeout. Programs start busy-waiting.
The BSD manual page for select(2) used to say "select() should
probably return the time remaining from the original timeout, if any,
by modifying the time value in place. This may be implemented in
future versions of the system. Thus, it is unwise to assume that the
timeout pointer will be unmodified by the select() call."
Some versions of Linux do perform this modification. Some don't. It is
incredibly unwise to assume one behaviour or the other.
To fix, put the timeout value into that structure every time you call
select(). Change code like
struct timeval timeout;
timeout.tv_sec = 1; timeout.tv_usec = 0;
while (some_condition)
select(n,readfds,writefds,exceptfds,&timeout);
to, say,
struct timeval timeout;
while (some_condition) {
timeout.tv_sec = 1; timeout.tv_usec = 0;
select(n,readfds,writefds,exceptfds,&timeout);
}
Some versions of Mosaic were at one time notable for this problem. The
speed of the spinning globe animation was inversely related to the
speed that the data was coming in from the network at!
_________________________________________________________________
Interrupted system calls.
Symptom:
When a program is stopped using Ctrl-Z and then restarted - or in
other situations that generate signals: Ctrl-C interruption,
termination of a child process etc. - it complains about "interrupted
system call" or "write: unknown error" or things like that.
_________________________________________________________________
Problem:
POSIX systems check for signals a bit more often than some older
unices. Linux may execute signal handlers ---
* asynchronously (at a timer tick)
* on return from any system call
* during the execution of the following system calls: select(),
pause(), connect(), accept(), read() on terminals, sockets, pipes
or files in /proc, write() on terminals, sockets, pipes or the
line printer, open() on FIFOs, PTYs or serial lines, ioctl() on
terminals, fcntl() with command F_SETLKW, wait4(), syslog(), any
TCP or NFS operations.
For other operating systems you may have to include the system calls
creat(), close(), getmsg(), putmsg(), msgrcv(), msgsnd(), recv(),
send(), wait(), waitpid(), wait3(), tcdrain(), sigpause(), semop() to
this list.
If a signal (that the program has installed a handler for) occurs
during a system call, the handler is called. When the handler returns
(to the system call) it detects that it was interrupted, and
immediately returns with -1 and errno = EINTR. The program is not
expecting that to happen, so bottles out.
You may choose between two fixes.
(1) For every signal handler that you install, add SA_RESTART to the
sigaction flags. For example, change
signal (sig_nr, my_signal_handler);
to
signal (sig_nr, my_signal_handler);
{ struct sigaction sa;
sigaction (sig_nr, (struct sigaction *)0, &sa);
#ifdef SA_RESTART
sa.sa_flags |= SA_RESTART;
#endif
#ifdef SA_INTERRUPT
sa.sa_flags &= ~ SA_INTERRUPT;
#endif
sigaction (sig_nr, &sa, (struct sigaction *)0);
}
Note that while this applies to most system calls, you must still
check for EINTR yourself on read(), write(), ioctl(), select(),
pause() and connect(). See below.
(2) Check for EINTR explicitly, yourself:
Here are two examples for read() and ioctl(),
Original piece of code using read()
int result;
while (len > 0) {
result = read(fd,buffer,len);
if (result < 0) break;
buffer += result; len -= result;
}
becomes
int result;
while (len > 0) {
result = read(fd,buffer,len);
if (result < 0) { if (errno != EINTR) break; }
else { buffer += result; len -= result; }
}
and a piece of code using ioctl()
int result;
result = ioctl(fd,cmd,addr);
becomes
int result;
do { result = ioctl(fd,cmd,addr); }
while ((result == -1) && (errno == EINTR));
Note that in some versions of BSD Unix the default behaviour is to
restart system calls. To get system calls interrupted you have to use
the SV_INTERRUPT or SA_INTERRUPT flag.
_________________________________________________________________
Writable strings (program seg faults randomly)
GCC has an optimistic view of its users, believing that they intend
string constants to be exactly that --- constant. Thus, it stores them
in the text (code) area of the program, where they can be paged in and
out from the program's disk image (instead of taking up swapspace),
and any attempt to rewrite them will cause a segmentation fault. This
is a feature!
It may cause a problem for old programs that, for example, call
mktemp() with a string constant as argument. mktemp() attempts to
rewrite its argument in place.
To fix, either (a) compile with -fwritable-strings, to get gcc to put
constants in data space, or (b) rewrite the offending parts to
allocate a non-constant string and strcpy the data into it before
calling.
_________________________________________________________________
Why does the execl() call fail?
Because you're calling it wrong. The first argument to execl is the
program that you want to run. The second and subsequent arguments
become the argv array of the program you're calling. Remember: argv[0]
is traditionally set even when a program is run with `no' arguments.
So, you should be writing
execl("/bin/ls","ls",NULL);
not just
execl("/bin/ls", NULL);
Executing the program with no arguments at all is construed as an
invitation to print out its dynamic library dependencies, at least
using a.out. ELF does things differently.
(If you want this library information, there are simpler interfaces;
see the section on dynamic loading, or the manual page for ldd).
_________________________________________________________________
Debugging and Profiling
Preventative maintenance (lint)
There is no widely-used lint for Linux, as most people are satisfied
with the warnings that gcc can generate. Probably the most useful is
the -Wall switch --- this stands for `Warnings, all' but probably has
more mnemonic value if thought of as the thing you bang your head
against.
There is a public domain lint available from . I don't know how good
it is.
_________________________________________________________________
Debugging
How do I get debugging information into a program ?
You need to compile and link all its bits with the -g switch, and
without the -fomit-frame-pointer switch. Actually, you don't need to
recompile all of it, just the bits you're interested in debugging.
On a.out configurations the shared libraries are compiled with
-fomit-frame-pointer, which gdb won't get on with. Giving the -g
option when you link should imply static linking; this is why.
If the linker fails with a message about not finding libg.a, you don't
have /usr/lib/libg.a, which is the special debugging-enabled C
library. It may be supplied in the libc binary package, or (in newer C
library versions) you may need to get the libc source code and build
it yourself. You don't actually need it though; you can get enough
information for most purposes simply by symlinking it to
/usr/lib/libc.a
_________________________________________________________________
How do I get it out again?
A lot of GNU software comes set up to compile and link with -g,
causing it to make very big (and often static) executables. This is
not really such a hot idea.
If the program has an autoconf generated configure script, you can
usually turn off debugging information by doing ./configure CFLAGS= or
./configure CFLAGS=-O2. Otherwise, check the Makefile. Of course, if
you're using ELF, the program is dynamically linked regardless of the
-g setting, so you can just strip it.
_________________________________________________________________
Available software
Most people use gdb, which you can get in source form from [46]GNU
archive sites, or as a binary from [47]tsx-11 or sunsite. xxgdb is an
X debugger based on this (i.e. you need gdb installed first). The
source may be found at
Also, the UPS debugger has been ported by Rick Sladkey. It runs under
X as well, but unlike xxgdb, it is not merely an X front end for a
text based debugger. It has quite a number of nice features, and if
you spend any time debugging stuff, you probably should check it out.
The Linux precompiled version and patches for the stock UPS sources
can be found in , and the original source at .
Another tool you might find useful for debugging is `strace', which
displays the system calls that a process makes. It has a multiplicity
of other uses too, including figuring out what pathnames were compiled
into binaries that you don't have the source for, exacerbating race
conditions in programs that you suspect contain them, and generally
learning how things work. The latest version of strace (currently
3.0.8) can be found at .
_________________________________________________________________
Background (daemon) programs
Daemon programs typically execute fork() early, and terminate the
parent. This makes for a short debugging session.
The simplest way to get around this is to set a breakpoint for fork,
and when the program stops, force it to return 0.
(gdb) list
1 #include <stdio.h>
2
3 main()
4 {
5 if(fork()==0) printf("child\n");
6 else printf("parent\n");
7 }
(gdb) break fork
Breakpoint 1 at 0x80003b8
(gdb) run
Starting program: /home/dan/src/hello/./fork
Breakpoint 1 at 0x400177c4
Breakpoint 1, 0x400177c4 in fork ()
(gdb) return 0
Make selected stack frame return now? (y or n) y
#0 0x80004a8 in main ()
at fork.c:5
5 if(fork()==0) printf("child\n");
(gdb) next
Single stepping until exit from function fork,
which has no line number information.
child
7 }
_________________________________________________________________
Core files
When Linux boots it is usually configured not to produce core files.
If you like them, use your shell's builtin command to re-enable them:
for C-shell compatibles (e.g. tcsh) this is
% limit core unlimited
while Bourne-like shells (sh, bash, zsh, pdksh) use
$ ulimit -c unlimited
If you want a bit more versatility in your core file naming (for
example, if you're trying to conduct a post-mortem using a debugger
that's buggy itself) you can make a simple mod to your kernel. Look
for the code in fs/binfmt_aout.c and fs/binfmt_elf.c (in newer
kernels, you'll have to grep around a little in older ones) that says
memcpy(corefile,"core.",5);
#if 0
memcpy(corefile+5,current->comm,sizeof(current->comm));
#else
corefile[4] = '\0';
#endif
and change the 0s to 1s.
_________________________________________________________________
Profiling
Profiling is a way to examine which bits of a program are called most
often or run for longest. It is a good way to optimize code and look
at where time is being wasted. You must compile all object files that
you require timing information for with -p, and to make sense of the
output file you will also need gprof (from the binutils package). See
the gprof manual page for details.
_________________________________________________________________
Linking
Between the two incompatible binary formats, the static vs shared
library distinction, and the overloading of the verb `link' to mean
both `what happens after compilation' and `what happens when a
compiled program is invoked' (and, actually, the overloading of the
word `load' in a comparable but opposite sense), this section is
complicated. Little of it is much more complicated than that sentence,
though, so don't worry too much about it.
To alleviate the confusion somewhat, we refer to what happens at
runtime as `dynamic loading' and cover it in the next section. You
will also see it described as `dynamic linking', but not here. This
section, then, is exclusively concerned with the kind of linking that
happens at the end of a compilation.
_________________________________________________________________
Shared vs static libraries
The last stage of building a program is to `link' it; to join all the
pieces of it together and see what is missing. Obviously there are
some things that many programs will want to do --- open files, for
example, and the pieces that do these things are provided for you in
the form of libraries. On the average Linux system these can be found
in /lib and /usr/lib/, among other places.
When using a static library, the linker finds the bits that the
program modules need, and physically copies them into the executable
output file that it generates. For shared libraries, it doesn't ---
instead it leaves a note in the output saying `when this program is
run, it will first have to load this library'. Obviously shared
libraries tend to make for smaller executables; they also use less
memory and mean that less disk space is used. The default behaviour of
Linux is to link shared if it can find the shared libraries, static
otherwise. If you're getting static binaries when you want shared,
check that the shared library files (*.sa for a.out, *.so for ELF) are
where they should be, and are readable.
On Linux, static libraries have names like libname.a, while shared
libraries are called libname.so.x.y.z where x.y.z is some form of
version number. Shared libraries often also have links pointing to
them, which are important, and (on a.out configurations) associated
.sa files. The standard libraries come in both shared and static
formats.
You can find out what shared libraries a program requires by using ldd
(List Dynamic Dependencies)
$ ldd /usr/bin/lynx
libncurses.so.1 => /usr/lib/libncurses.so.1.9.6
libc.so.5 => /lib/libc.so.5.2.18
This shows that on my system the WWW browser `lynx' depends on the
presence of libc.so.5 (the C library) and libncurses.so.1 (used for
terminal control). If a program has no dependencies, ldd will say
`statically linked' or `statically linked (ELF)'.
_________________________________________________________________
Interrogating libraries (`which library is sin() in?')
nm libraryname should list all the symbols that libraryname has
references to. It works on both static and shared libraries. Suppose
that you want to know where tcgetattr() is defined: you might do
$ nm libncurses.so.1 |grep tcget
U tcgetattr
The U stands for `undefined' --- it shows that the ncurses library
uses but does not define it. You could also do
$ nm libc.so.5 | grep tcget
00010fe8 T __tcgetattr
00010fe8 W tcgetattr
00068718 T tcgetpgrp
The `W' stands for `weak', which means that the symbol is defined, but
in such a way that it can be overridden by another definition in a
different library. A straightforward `normal' definition (such as the
one for tcgetpgrp) is marked by a `T'
The short answer to the question in the title, by the way, is
libm.(so|a). All the functions defined in <math.h> are kept in the
maths library; thus you need to link with -lm when using any of them.
_________________________________________________________________
Finding files
ld: Output file requires shared library `libfoo.so.1`
The file search strategy of ld and friends varies according to
version, but the only default you can reasonably assume is /usr/lib.
If you want libraries elsewhere to be searched, specify their
directories with the -L option to gcc or ld.
If that doesn't help, check that you have the right file in that
place. For a.out, linking with -lfoo makes ld look for libfoo.sa
(shared stubs), and if unsuccessful then for libfoo.a (static). For
ELF, it looks for libfoo.so then libfoo.a. libfoo.so is usually a
symbolic link to libfoo.so.x.
_________________________________________________________________
Building your own libraries
Version control
As any other program, libraries tend to have bugs which get fixed over
time. They also may introduce new features, change the effect of
existing ones, or remove old ones. This could be a problem for
programs using them; what if it was depending on that old feature?
So, we introduce library versioning. We categorise the changes that
might be made to a library as `minor' or `major', and we rule that a
`minor' change is not allowed to break old programs that are using the
library. You can tell the version of a library by looking at its
filename (actually, this is, strictly speaking, a lie for ELF; keep
reading to find out why) : libfoo.so.1.2 has major version 1, minor
version 2. The minor version number can be more or less anything ---
libc puts a `patchlevel' in it, giving library names like
libc.so.5.2.18, and it's also reasonable to put letters, underscores,
or more or less any printable ASCII in it.
One of the major differences between ELF and a.out format is in
building shared libraries. We look at ELF first, because it's simpler.
_________________________________________________________________
ELF? What is it then, anyway?
ELF (Executable and Linking Format) is a binary format originally
developed by USL (UNIX System Laboratories) and currently used in
Solaris and System V Release 4. Because of its increased flexibility
over the older a.out format that Linux was using, the GCC and C
library developers decided last year to move to using ELF as the Linux
standard binary format also.
_________________________________________________________________
Come again?
This section is from the document '/news-archives/comp.sys.sun.misc'.
"ELF ("Executable Linking Format) is the "new, improved" object file
format introduced in SVR4. ELF is much more powerful than straight
COFF, in that it *is* user-extensible. ELF views an object-file as an
arbitarily long list of sections (rather than an array of fixed size
entities), these sections, unlike in COFF, do not HAVE to be in a
certain place and do not HAVE to come in any specific order etc. Users
can add new sections to object-files if they wish to capture new data.
ELF also has a far more powerful debugging format called DWARF
(Debugging With Attribute Record Format) - not currently fully
supported on linux (but work is underway). A linked list of DWARF DIEs
(or Debugging Information Entries) forms the .debug section in ELF.
Instead of being a collection of small, fixed-size information
records, DWARF DIEs each contain an arbitrarily long list of complex
attributes and are written out as a scope-based tree of program data.
DIEs can capture a large amount of information that the COFF .debug
section simply couldn't (like C++ inheritance graphs etc.)." "ELF
files are accessed via the SVR4 (Solaris 2.0 ?) ELF access library,
which provides an easy and fast interface to the more gory parts of
ELF. One of the major boons in using the ELF access library is that
you will never need to look at an ELF file qua. UNIX file, it is
accessed as an Elf *, after an elf_open() call and from then on, you
perform elf_foobar() calls on its components instead of messing about
with its actual on-disk image (something many COFFers did with
impunity). "
The case for/against ELF, and the necessary contortions to upgrade an
a.out system to support it, are covered in the ELF-HOWTO and I don't
propose to cut/paste them here. The HOWTO should be available in the
same place as you found this one.
_________________________________________________________________
ELF shared libraries
To build libfoo.so as a shared library, the basic steps look like
this:
$ gcc -fPIC -c *.c
$ gcc -shared -Wl,-soname,libfoo.so.1 -o libfoo.so.1.0 *.o
$ ln -s libfoo.so.1.0 libfoo.so.1
$ ln -s libfoo.so.1 libfoo.so
$ LD_LIBRARY_PATH=`pwd`:$LD_LIBRARY_PATH ; export LD_LIBRARY_PATH
This will generate a shared library called libfoo.so.1.0, and the
appropriate links for ld (libfoo.so) and the dynamic loader
(libfoo.so.1) to find it. To test, we add the current directory to
LD_LIBRARY_PATH.
When you're happpy that the library works, you'll have to move it to,
say, /usr/local/lib, and recreate the appropriate links. The link from
libfoo.so.1 to libfoo.so.1.0 is kept up to date by ldconfig, which on
most systems is run as part of the boot process. The libfoo.so link
must be updated manually. If you are scrupulous about upgrading all
the parts of a library (e.g. the header files) at the same time, the
simplest thing to do is make libfoo.so -> libfoo.so.1, so that
ldconfig will keep both links current for you. If you aren't, you're
setting yourself up to have all kinds of weird things happen at a
later date. Don't say you weren't warned.
$ su
# cp libfoo.so.1.0 /usr/local/lib
# /sbin/ldconfig
# ( cd /usr/local/lib ; ln -s libfoo.so.1 libfoo.so )
_________________________________________________________________
Version numbering, sonames and symlinks
Each library has a soname. When the linker finds one of these in a
library it is searching, it embeds the soname into the binary instead
of the actual filename it is looking at. At runtime, the dynamic
loader will then search for a file with the name of the soname, not
the library filename. Thus a library called libfoo.so could have a
soname libbar.so, and all programs linked to it would look for
libbar.so instead when they started.
This sounds like a pointless feature, but it is key to understanding
how multiple versions of the same library can coexist on a system. The
de facto naming standard for libraries in Linux is to call the
library, say, libfoo.so.1.2, and give it a soname of libfoo.so.1. If
it's added to a `standard' library directory (e.g. /usr/lib), ldconfig
will create a symlink libfoo.so.1 -> libfoo.so.1.2 so that the
appropriate image is found at runtime. You also need a link libfoo.so
-> libfoo.so.1 so that ld will find the right soname to use at link
time.
So, when you fix bugs in the library, or add new functions (any
changes that won't adversely affect existing programs), you rebuild
it, keeping the soname as it was, and changing the filename. When you
make changes to the library that would break existing binaries, you
simply increment the number in the soname --- in this case, call the
new version libfoo.so.2.0, and give it a soname of libfoo.so.2. Now
switch the libfoo.so link to point to the new version and all's well
with the world again.
Note that you don't have to name libraries this way, but it's a good
convention. ELF gives you the flexibility to name libraries in ways
that will confuse the pants off people, but that doesn't mean you have
to use it.
Executive summary: supposing that you observe the tradition that major
upgrades may break compatibility, minor upgrades may not, then link
with
gcc -shared -Wl,-soname,libfoo.so.major -o libfoo.so.major.minor
and everything will be all right.
_________________________________________________________________
a.out. Ye olde traditional format
The ease of building shared libraries is a major reason for upgrading
to ELF. That said, it's still possible in a.out. Get and read the 20
page document that you will find after unpacking it. I hate to be so
transparently partisan, but it should be clear from context that I
never bothered myself :-)
_________________________________________________________________
ZMAGIC vs QMAGIC
QMAGIC is an executable format just like the old a.out (also known as
ZMAGIC) binaries, but which leaves the first page unmapped. This
allows for easier NULL dereference trapping as no mapping exists in
the range 0-4096. As a side effect your binaries are nominally smaller
as well (by about 1K).
Obsolescent linkers support ZMAGIC only, semi-obsolescent support both
formats, and current versions support QMAGIC only. This doesn't
actually matter, though, as the kernel can still run both formats.
Your `file' command should be able to identify whether a program is
QMAGIC.
_________________________________________________________________
File Placement
An a.out (DLL) shared library consists of two real files and a
symlink. For the `foo' library used throughout this document as an
example, these files would be libfoo.sa and libfoo.so.1.2; the symlink
would be libfoo.so.1 and would point at the latter of the files. What
are these for?
At compile time, ld looks for libfoo.sa. This is the `stub' file for
the library, and contains all exported data and pointers to the
functions required for run time linking.
At run time, the dynamic loader looks for libfoo.so.1. This is a
symlink rather than a real file so that libraries can be updated with
newer, bugfixed versions without crashing any application that was
using the library at the time. After the new version --- say,
libfoo.so.1.3 --- is completely there, running ldconfig will switch
the link to point to it in one atomic operation, leaving any program
which had the old version still perfectly happy.
DLL libraries (I know that's a tautology --- so sue me) often appear
bigger than their static counterparts. They reserve space for future
expansion in the form of `holes' which can be made to take no disk
space. A simple cp call or using the program makehole will achieve
this. You can also strip them after building, as the addresses are in
fixed locations. Do not attempt to strip ELF libraries.
_________________________________________________________________
``libc-lite''?
A libc-lite is a light-weight version of the libc library built such
that it will fit on a floppy and suffice for all of the most menial of
UNIX tasks. It does not include curses, dbm, termcap etc code. If your
/lib/libc.so.4 is linked to a lite lib, you are advised to replace it
with a full version.
_________________________________________________________________
Linking: common problems
Send me your linking problems! I probably won't do anything about
them, but I will write them up if I get enough ...
Programs link static when you wanted them shared
Check that you have the right links for ld to find each shared
library. For ELF this means a libfoo.so symlink to the image,
for a.out a libfoo.sa file. A lot of people had this problem
after moving from ELF binutils 2.5 to 2.6 --- the earlier
version searched more `intelligently' for shared libraries, so
they hadn't created all the links. The intelligent behaviour
was removed for compatibility with other architectures, and
because quite often it got its assumptions wrong and caused
more trouble than it solved.
The DLL tool `mkimage' fails to find libgcc, or
As of libc.so.4.5.x and above, libgcc is no longer shared.
Hence you must replace occurrences of `-lgcc' on the offending
line with `gcc -print-libgcc-file-name` (complete with the
backquotes).
Also, delete all /usr/lib/libgcc* files. This is important.
__NEEDS_SHRLIB_libc_4 multiply defined messages
are another consequence of the same problem.
``Assertion failure'' message when rebuilding a DLL ?
This cryptic message most probably means that one of your jump
table slots has overflowed because too little space has been
reserved in the original jump.vars file. You can locate the
culprit(s) by running the `getsize' command provided in the
tools-2.17.tar.gz package. Probably the only solution, though,
is to bump the major version number of the library, forcing it
to be backward incompatible.
ld: output file needs shared library libc.so.4
This usually happens when you are linking with libraries other
than libc (e.g. X libraries), and use the -g switch on the link
line without also using -static.
The .sa stubs for the shared libraries usually have an
undefined symbol _NEEDS_SHRLIB_libc_4 which gets resolved from
the libc.sa stub. However with -g you end up linking with
libg.a or libc.a and thus this symbol never gets resolved,
leading to the above error message.
In conclusion, add -static when compiling with the -g flag, or
don't link with -g. Quite often you can get enough debugging
information by compiling the individual files with -g, and
linking without it.
_________________________________________________________________
Dynamic Loading
This section is a tad short right now; it will be expanded over time
as I gut the ELF howto
_________________________________________________________________
Concepts
Linux has shared libraries, as you will by now be sick of hearing if
you read the whole of the last section at a sitting. Some of the
matching-names-to-places work which was traditionally done at link
time must be deferred to load time.
_________________________________________________________________
Error messages
Send me your link errors! I won't do anything about them, but I might
write them up ...
can't load library: /lib/libxxx.so, Incompatible version
(a.out only) This means that you don't have the correct major
version of the xxx library. No, you can't just make a symlink
to another version that you do have; if you are lucky this will
cause your program to segfault. Get the new version. A similar
situation with ELF will result in a message like
ftp: can't load library 'libreadline.so.2'
warning using incompatible library version xxx
(a.out only) You have an older minor version of the library
than the person who compiled the program used. The program will
still run. Probably. An upgrade wouldn't hurt, though.
_________________________________________________________________
Controlling the operation of the dynamic loader
There are a range of environment variables that the dynamic loader
will respond to. Most of these are more use to ldd than they are to
the average user, and can most conveniently be set by running ldd with
various switches. They include
* LD_BIND_NOW --- normally, functions are not `looked up' in
libraries until they are called. Setting this flag causes all the
lookups to happen when the library is loaded, giving a slower
startup time. It's useful when you want to test a program to make
sure that everything is linked.
* LD_PRELOAD can be set to a file containing `overriding' function
definitions. For example, if you were testing memory allocation
strategies, and wanted to replace `malloc', you could write your
replacement routine, compile it into malloc.o and then
$ LD_PRELOAD=malloc.o; export LD_PRELOAD
$ some_test_program
LD_ELF_PRELOAD and LD_AOUT_PRELOAD are similar, but only apply to
the appropriate type of binary. If LD_something_PRELOAD and
LD_PRELOAD are set, the more specific one is used.
* LD_LIBRARY_PATH is a colon-separated list of directories in which
to look for shared libraries. It does not affect ld; it only has
effect at runtime. Also, it is disabled for programs that run
setuid or setgid. Again, LD_ELF_LIBRARY_PATH and
LD_AOUT_LIBRARY_PATH can also be used to direct the search
differently for different flavours of binary. LD_LIBRARY_PATH
shouldn't be necessary in normal operation; add the directories to
/etc/ld.so.conf/ and rerun ldconfig instead.
* LD_NOWARN applies to a.out only. When set (e.g. with
LD_NOWARN=true; export LD_NOWARN) it stops the loader from issuing
non-fatal warnings (such as minor version incompatibility
messages).
* LD_WARN applies to ELF only. When set, it turns the usually fatal
``Can't find library'' messages into warnings. It's not much use
in normal operation, but important for ldd.
* LD_TRACE_LOADED_OBJECTS applies to ELF only, and causes programs
to think they're being run under ldd:
$ LD_TRACE_LOADED_OBJECTS=true /usr/bin/lynx
libncurses.so.1 => /usr/lib/libncurses.so.1.9.6
libc.so.5 => /lib/libc.so.5.2.18
_________________________________________________________________
Writing programs with dynamic loading
This is very close to the way that Solaris 2.x dynamic loading support
works, if you're familiar with that. It is covered extensively in H J
Lu's ELF programming document, and the dlopen(3) manual page, which
can be found in the ld.so package. Here's a nice simple example
though: link it with -ldl
#include <dlfcn.h>
#include <stdio.h>
main()
{
void *libc;
void (*printf_call)();
if(libc=dlopen("/lib/libc.so.5",RTLD_LAZY))
{
printf_call=dlsym(libc,"printf");
(*printf_call)("hello, world\n");
}
}
_________________________________________________________________
Contacting the developers
Bug reports
Start by narrowing the problem down. Is it specific to Linux, or does
it happen with gcc on other systems? Is it specific to the kernel
version? Library version? Does it go away if you link static? Can you
trim the program down to something short that demonstrates the bug?
Having done that, you'll know what program(s) the bug is in. For GCC,
the bug reporting procedure is explained in the info file. For ld.so
or the C or maths libraries, send mail to linux-gcc@vger.rutgers.edu.
If possible, include a short and self-contained program that exhibits
the bug, and a description both of what you want it to do, and what it
actually does.
_________________________________________________________________
Helping with development
If you want to help with the development effort for GCC or the C
library, the first thing to do is join the linux-gcc@vger.rutgers.edu
mailing list. If you just want to see what the discussion is about,
there are list archives at . The second and subsequent things depend
on what you want to do!
_________________________________________________________________
The Remains
The Credits
" Only presidents, editors, and people with tapeworms have the right
to use the editorial ``we''." (Mark Twain)
This HOWTO is based very closely on Mitchum DSouza's GCC-FAQ; most of
the information (not to mention a reasonable amount of the text) in it
comes directly from that document. Instances of the first person
pronoun in this HOWTO could refer to either of us; generally the ones
that say ``I have not tested this; don't blame me if it toasts your
hard disk/system/spouse'' apply to both of us.
Contributors to this document have included (in ASCII ordering by
first name) Andrew Tefft, Axel Boldt, Bill Metzenthen, Bruce Evans,
Bruno Haible, Daniel Barlow, Daniel Quinlan, David Engel, Dirk
Hohndel, Eric Youngdale, Fergus Henderson, H.J. Lu, Jens Schweikhardt,
Kai Petzke, Michael Meissner, Mitchum DSouza, Olaf Flebbe, Paul
Gortmaker, Rik Faith, Steven S. Dick, Tuomas J Lukka, and of course
Linus Torvalds, without whom the whole exercise would have been
pointless, let alone impossible :-)
Please do not feel offended if your name has not appeared here and you
have contributed to this document (either as HOWTO or as FAQ). Email
me and I will rectify it.
_________________________________________________________________
Translations
* French, Eric Dumas
<[48]dumas@freenix.fr>
http://www.freenix.fr/unix/linux/HOWTO/GCC-HOWTO.html
* Italian, Andrea Girotto
<[49]andrea.girotto@usa.net>
http://www.pluto.linux.it/ildp/HOWTO/GCC-HOWTO.html
* Japanese,
<[50]nakano@apm.seikei.ac.jp>
_________________________________________________________________
Feedback
is welcomed. Mail me at [51]daniel.barlow@linux.org. My PGP public key
(ID 5F263625) is available from my [52]web pages, if you feel the need
to be secretive about things.
_________________________________________________________________
Legalese
All trademarks used in this document are acknowledged as being owned
by their respective owners.
This document is copyright (C) 1996,1999 Daniel Barlow
<dan@detached.demon.co.uk>. It may be reproduced and distributed in
whole or in part, in any medium physical or electronic, as long as
this copyright notice is retained on all copies. Commercial
redistribution is allowed and encouraged; however, the author would
like to be notified of any such distributions.
All translations, derivative works, or aggregate works incorporating
any Linux HOWTO documents must be covered under this copyright notice.
That is, you may not produce a derivative work from a HOWTO and impose
additional restrictions on its distribution. Exceptions to these rules
may be granted under certain conditions; please contact the Linux
HOWTO coordinator at the address given below.
In short, we wish to promote dissemination of this information through
as many channels as possible. However, we do wish to retain copyright
on the HOWTO documents, and would like to be notified of any plans to
redistribute the HOWTOs.
If you have questions, please contact Tim Bynum, the Linux HOWTO
coordinator, at linux-howto@sunsite.unc.edu via email.
References
Visible links
1. file://localhost/export/sunsite/users/gferg/work/00_GCC-HOWTO.html#AEN17
2. file://localhost/export/sunsite/users/gferg/work/00_GCC-HOWTO.html#AEN19
3. file://localhost/export/sunsite/users/gferg/work/00_GCC-HOWTO.html#INDEX.3
4. file://localhost/export/sunsite/users/gferg/work/00_GCC-HOWTO.html#AEN48
5. file://localhost/export/sunsite/users/gferg/work/00_GCC-HOWTO.html#AEN63
6. file://localhost/export/sunsite/users/gferg/work/00_GCC-HOWTO.html#AEN123
7. file://localhost/export/sunsite/users/gferg/work/00_GCC-HOWTO.html#INDEX.12
8. file://localhost/export/sunsite/users/gferg/work/00_GCC-HOWTO.html#AEN165
9. file://localhost/export/sunsite/users/gferg/work/00_GCC-HOWTO.html#INDEX.17
10. file://localhost/export/sunsite/users/gferg/work/00_GCC-HOWTO.html#AEN236
11. file://localhost/export/sunsite/users/gferg/work/00_GCC-HOWTO.html#AEN250
12. file://localhost/export/sunsite/users/gferg/work/00_GCC-HOWTO.html#INDEX.25
13. file://localhost/export/sunsite/users/gferg/work/00_GCC-HOWTO.html#AEN265
14. file://localhost/export/sunsite/users/gferg/work/00_GCC-HOWTO.html#AEN327
15. file://localhost/export/sunsite/users/gferg/work/00_GCC-HOWTO.html#AEN501
16. file://localhost/export/sunsite/users/gferg/work/00_GCC-HOWTO.html#INDEX.58
17. file://localhost/export/sunsite/users/gferg/work/00_GCC-HOWTO.html#INDEX.59
18. file://localhost/export/sunsite/users/gferg/work/00_GCC-HOWTO.html#AEN569
19. file://localhost/export/sunsite/users/gferg/work/00_GCC-HOWTO.html#AEN575
20. file://localhost/export/sunsite/users/gferg/work/00_GCC-HOWTO.html#AEN579
21. file://localhost/export/sunsite/users/gferg/work/00_GCC-HOWTO.html#INDEX.67
22. file://localhost/export/sunsite/users/gferg/work/00_GCC-HOWTO.html#AEN628
23. file://localhost/export/sunsite/users/gferg/work/00_GCC-HOWTO.html#AEN643
24. file://localhost/export/sunsite/users/gferg/work/00_GCC-HOWTO.html#AEN796
25. file://localhost/export/sunsite/users/gferg/work/00_GCC-HOWTO.html#AEN800
26. file://localhost/export/sunsite/users/gferg/work/00_GCC-HOWTO.html#AEN803
27. file://localhost/export/sunsite/users/gferg/work/00_GCC-HOWTO.html#INDEX.80
28. file://localhost/export/sunsite/users/gferg/work/00_GCC-HOWTO.html#INDEX.82
29. file://localhost/export/sunsite/users/gferg/work/00_GCC-HOWTO.html#AEN867
30. file://localhost/export/sunsite/users/gferg/work/00_GCC-HOWTO.html#INDEX.84
31. file://localhost/export/sunsite/users/gferg/work/00_GCC-HOWTO.html#AEN876
32. file://localhost/export/sunsite/users/gferg/work/00_GCC-HOWTO.html#AEN881
33. file://localhost/export/sunsite/users/gferg/work/00_GCC-HOWTO.html#AEN883
34. file://localhost/export/sunsite/users/gferg/work/00_GCC-HOWTO.html#AEN890
35. file://localhost/export/sunsite/users/gferg/work/00_GCC-HOWTO.html#AEN905
36. file://localhost/export/sunsite/users/gferg/work/00_GCC-HOWTO.html#AEN910
37. http://www.debian.org/
38. http://metalab.unc.edu/LDP/HOWTO/
39. http://www.telent.net/linux/linux/gcc-howto/
40. ftp://tsx-11.mit.edu/pub/linux/packages/GCC/
41. ftp://sunsite.unc.edu/pub/Linux/docs/
42. ftp://prep.ai.mit.edu/pub/gnu/
43. ftp://tsx-11.mit.edu/pub/linux/packages/GCC/
44. ftp://tsx-11.mit.edu/pub/linux/packages/GCC/
45. ftp://tsx-11.mit.edu/pub/linux/packages/GCC/
46. ftp://prep.ai.mit.edu/pub/gnu
47. ftp://tsx-11.mit.edu/pub/linux/packages/GCC
48. mailto:dumas@freenix.fr
49. mailto:andrea.girotto@usa.net
50. mailto:nakano@apm.seikei.ac.jp
51. mailto:daniel.barlow@linux.org
52. http://www.telent.net/#pgp
Hidden links:
53. ftp://tsx-11.mit.edu/pub/linux/packages/GCC/
54. ftp://tsx-11.mit.edu/pub/linux/packages/GCC/
55. ftp://sunsite.unc.edu/pub/Linux/devel/msdos
56. ftp://prep.ai.mit.edu/pub/gnu
57. ftp://larch.lcs.mit.edu/pub/Larch/lclint
58. ftp://ftp.x.org/contrib/xxgdb-1.08.tar.gz
59. ftp://sunsite.unc.edu/pub/Linux/devel/debuggers/
60. ftp://ftp.x.org/contrib/ups-2.45.2.tar.Z
61. ftp://ftp.std.com/pub/jrs/
62. ftp://tsx-11.mit.edu/pub/linux/packages/GCC/src/tools-2.17.tar.gz
63. http://homer.ncm.com/linux-gcc/